A Rowan company - serving Torrance, CA
A living room with a wall of new windows and a sliding glass door
PGT · Torrance

PGT Windows & Doors in Torrance, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Torrance
New double-hung windows in a dining room
A new front entry door with glass sidelights
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

PGT Windows & Doors in Torrance: What to Know First

As an independent PGT service provider, Rowan Construction Group Torrance installs, replaces and repairs PGT windows and doors across Torrance, with most single-window or door jobs completed in one to two days and full-home replacements typically running three to five days. You get a flat written price and written scope before anyone touches a frame, on every visit. There’s no “call for a quote” step here – the number is on the page, in dollars, so you can compare it against the other estimates you’re collecting. Impact window installation in Torrance runs $8,000 – $25,000; standard window replacement runs $4,500 – $15,000.

Call (888) 349-6729

This page is for the homeowner who already has PGT windows or doors and needs them serviced, matched or replaced – not for someone shopping a brand from scratch. Call (888) 349-6729 for a free estimate.

How PGT Products Fail – and How We Fix Them

PGT builds in Florida, and the products that show up in Torrance homes were engineered for hurricane country, not for the marine layer and the dry Santa Ana cycles. That mismatch drives most of what we see.

  • WinGuard aluminum impact frames: finish chalk and gasket compression. The powder coat on WinGuard frames takes a beating from salt air off the beach cities and UV exposure on south-facing walls. We usually see it first on Torrance elevations facing the water – a white haze on the frame and gaskets that have gone hard and stopped sealing. The fix is re-gasket and refinish if the extrusion is still sound; if the coating has failed down to bare aluminum, we quote replacement of that unit rather than chase it.
  • PGT vinyl new-construction series: sash sag and track wear. On vinyl sliders and single-hungs, the rollers and balance shoes wear faster than the sash itself. A sash that drags or drops on one corner is almost always the balance assembly, not the frame – and we can usually replace the hardware without pulling the window. Owners often assume it’s a full replacement; it usually isn’t.
  • Sliding glass and patio doors: threshold and roller failure. The big sliding doors are the highest-traffic PGT product in a Torrance house, and the failure is predictable. Stainless rollers flat-spot, the threshold fills with grit, and the panel starts shimmying. We pull the panel, replace the rollers, true the track and re-set the weather seal. If the glass unit has fogged, the whole insulated glass unit gets swapped instead.
  • Sealed units: desiccant saturation and internal fogging. A fogged PGT glass unit means the seal failed, and there’s no repair – the IGU gets replaced. The tell that matters: fogging between the panes is a seal failure, while condensation on the room-side surface is a humidity and ventilation problem. Two different fixes, frequently confused.
  • Hinge and locking hardware on PGT doors: misalignment after seasonal movement. Wood and hybrid door slabs move with Torrance’s dry-warm-wet swings, and the multi-point hardware goes out of adjustment. We re-set the hinges, adjust the locking points and lubricate with a dry-film product. If the strike plate has been wallowed out, it gets replaced, not shimmed.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Our PGT Windows & Doors Process

  1. 1
    Diagnose, in writing. We photograph the unit, record the series and the failure, and note whether it is the sash, the frame, the hardware or the glass. You get the photo record as a standard deliverable on the visit.
  2. 2
    Decide OEM versus aftermarket, with you. OEM PGT hardware preserves the factory fit and keeps a warranty claim clean. A quality aftermarket roller or balance can be the right call on an older unit where OEM parts are discontinued or lead times run long. We quote both when it’s a real choice and explain the trade-off in one pass.
  3. 3
    Protect the surrounding finish. Floors covered, trim taped, and the opening sealed off from the rest of the house before any glass comes out.
  4. 4
    Do the work. Re-gasket, re-glaze, re-hang or replace, depending on what the diagnosis found.
  5. 5
    Test it in front of you. Operate the unit through its full travel, check the lock and weep paths, and confirm the seal. If it doesn’t close and latch cleanly, the job isn’t finished.
  6. 6
    Document and warrant. Photo record delivered, written warranty in hand, and the 365-Day Done Right Promise attached. If it isn’t right within the year, we make it right.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What PGT Windows & Doors Costs in Torrance

A new bay window with a cushioned seat

These are the ranges we quote most often for PGT work in Torrance. Every one of them comes to you as a flat written price with a written scope – not an hourly estimate.

Job Typical range
Impact window installation (WinGuard or equivalent) $8,000 – $25,000
Standard window replacement $4,500 – $15,000
Single sash or hardware repair Quoted per unit after diagnosis
Fogged IGU replacement Priced per unit, based on size and series
Sliding or patio door replacement Included in the door scope on your written quote

What moves the price: the series and size of the opening, whether the frame is being replaced or reused, glass package (impact versus standard, low-E coating), and whether the rough opening needs work. The written price holds; under the Haven Standard, no change proceeds without a signed change order, so the number you agree to is the number you pay. Call (888) 349-6729 for a free estimate.

Why Torrance Homeowners Call Rowan Construction Group Torrance for PGT Work

We put the price in writing before anyone picks up a tool, and we back it with the 365-Day Done Right Promise – if it isn’t done right, we make it right, all year long. Every crew member is background-checked and uniformed, a live person answers calls around the clock, and every visit includes a documented photo record as standard. Our technicians have up to 19 years of experience, and they’ve worked the PGT lines that actually show up in Torrance homes – WinGuard, the vinyl new-construction series and the sliding patio doors. And PGT isn’t the only brand on the truck: we also work with KraftMaid, Kohler, GAF and Master Halco, so a windows-and-doors job that turns into a broader scope doesn’t send you shopping for a second contractor.

FAQs

Installers setting a new window and checking it for level

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanityA garage converted into a guest room and home officeNew architectural shingles with a clean valleyA new white vinyl privacy fence with a double gateA new stained cedar privacy fence

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Torrance

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Torrance team

A local vetted partner works across Torrance and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (888) 349-6729
Local Service Coverage

Request a Free Estimate in Torrance

Tell us what you need - Rowan Construction Group Torrance responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch