







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Torrance Homeowners Choose Toto Construction
Rowan Construction Group Torrance provides independent Toto service and installation across Torrance, from G-Max flush tower repairs on a Drake to full Washlet and Neorest diagnostics. What sets our Toto work apart is fixture-level familiarity: we handle these toilets and bidet seats often enough to know which failures are cheap fixes and which mean the unit is finished. We are an independent Toto service provider, not affiliated with or authorized by Toto, which means our repair-or-replace call answers to the fixture in front of us, not a manufacturer program. Call (888) 349-6729 for a free estimate.
Why Trust Rowan Construction Group Torrance for Your Toto Construction?

Toto builds a specific machine, and it fails in specific ways. Our technicians have up to 19 years of experience, and they can tell a worn G-Max tower seal from a supply-line restriction before the tank comes off. That matters on Toto because the brand’s reputation for a clean, quiet flush rests on parts that wear on a schedule: the tower assembly, the fill valve, the refill tube. Guessing at those parts is how a weak flush turns into three service calls.
We source OEM-compatible Toto components for fill valves, flush towers, and Washlet internals. Fitting a generic flapper or an aftermarket tower into a Drake or Ultramax II is a common cause of repeat trouble, because the geometry and timing are tuned to the bowl. Warranty-safe practice is the rule here: we work in a way that respects the existing Toto coverage rather than voiding it with mismatched parts.
Under Clause 1 of the Haven Standard, you get the price in writing before anyone touches the fixture. That’s the same discipline whether we’re swapping a fill valve or folding a new Toto into a bathroom remodel. Every visit includes a documented photo record, so you see what we found and what we replaced.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Torrance
- G-Max / Tornado flush tower wear on the Drake (CST743 / CST744) and Ultramax II (MS604114CEFG). The tower’s seal and moving assembly degrade with use and with Torrance’s hard water, so the flush goes weak or the toilet runs between flushes. It’s almost never a clogged drain; it’s the tower losing its seal.
- Fill valve and supply-line degradation. A tired fill valve or a scaled supply line produces a slow refill or a constant trickle into the bowl. Coastal damp and mineral content speed this along, and it’s the most common “running toilet” cause we see on Toto two-piece models.
- Washlet C5 / S550e nozzle scaling and sensor faults. Clogged or mineral-scaled nozzles weaken the spray, and seat sensors can fault out and shut down the bidet function entirely. We test the seat before recommending a board or a full swap.
- Neorest electronic control board or pump failure. Integrated smart toilets depend on electronics and a pump, and when either fails you need diagnostic access plus OEM replacement parts. Generic smart-toilet boards don’t drop into a Neorest cleanly.
- Original 1980s Carlyle toilets still in service. Plenty of these are still flushing in Torrance tract homes. The porcelain is often fine while the internals are shot, which is a parts decision, not a replacement decision, unless the bowl is cracked.
A Toto Drake or Ultramax that flushes weakly or runs between flushes is usually a worn G-Max flush tower or a tired fill valve, not a blocked drain. A qualified pro pulls the tank, checks the tower seal and refill tube, and swaps the assembly with an OEM kit rather than guessing at the flapper. On a Washlet or Neorest, a dead spray or seat sensor typically traces to a scaled nozzle or a control fault, and the pro tests the seat before recommending a board replacement or a full unit swap.
Toto Parts & Our Repair-vs-Replace Approach

For Toto, the parts question is the whole job. We use OEM Toto fill valves, flush towers, and Washlet components when the fixture is otherwise sound, because aftermarket flush valves often fit poorly and cause repeat calls. We don’t claim to keep Toto parts in local stock; we source the correct component for your exact model and series, which is why we ask for the model number up front.
Repair versus replace gets an honest answer, not a sales one. A one-piece bowl with fine porcelain and worn internals is a repair. A one-piece bowl with cracked porcelain, or a discontinued electronic control that no longer has a reliable OEM path, is a replacement, and we’ll say so plainly. This is the same judgment we bring to sourcing across dozens of brands, and it’s why the written quote reflects what the fixture actually needs. Call (888) 349-6729 for a written price on either path.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We identify the exact model, confirm the symptom, and isolate whether it’s the flush tower, fill valve, supply line, nozzle, or control board. On a Washlet or Neorest we test the electronic function before anything is ordered.
- 2
Written repair or install plan. You get a flat written price and scope before work starts, including the specific OEM part and what it addresses. No change proceeds without a signed change order.
- 3
Repair or install. We pull the tank or seat, replace the component with the correct OEM part, and set clearances and connections to spec. On a remodel, the fixture gets set into a properly prepped, waterproofed surround.
- 4
Test. We cycle the flush, check refill timing, verify the Washlet spray and sensors, and confirm no trickle into the bowl. The documented photo record captures what was found and what was done.
- 5
Warranty and record. The written warranty is part of the job, backed by the 365-Day Done Right Promise: if it isn’t done right, we make it right.
Toto Products We Service & Install in Torrance
We service and install the Toto lines Torrance owners actually own: the Drake two-piece (CST743 / CST744) and the Ultramax II one-piece (MS604114CEFG), along with the Washlet C5 and S550e bidet seats and the Neorest integrated smart toilet family. We also handle original Carlyle toilets and other older Toto models still in service across the city’s 1950s – ’70s tract stock. Because we work in bathroom remodeling as well, a Toto fixture can be repaired on its own or set into a new vanity and shower layout in the same project.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
Rowan works across far more than Toto. We install and service KraftMaid cabinetry, Kohler fixtures, GAF roofing, and PGT windows and doors, among dozens of vetted brands. That breadth means your bathroom project can move from fixture repair to a coordinated remodel without handing off to a second contractor. Call (888) 349-6729 for a free estimate.
Toto Pricing in Torrance
Here’s what our Toto-related bathroom work runs in the Torrance market. A simple fixture repair is quoted line by line; larger scopes are quoted from these ranges, with a flat written price before work begins.
| Service | Price Range |
|---|---|
| Full Bathroom Remodeling | $9000 – $28000 |
| Small Bathroom Remodel | $5000 – $12000 |
| Walk-In Shower Installation | $4500 – $12000 |
| Tub-to-Shower Conversion | $3500 – $10000 |
| Bathroom Vanity Installation | $800 – $3000 |
FAQs – Toto Construction Service in Torrance
No. We are an independent Toto service provider and are not affiliated with or authorized by Toto. That independence lets us recommend repair or replacement based on what the fixture needs, not a manufacturer program.
Yes, we use OEM Toto fill valves, flush towers, and Washlet components when the fixture is otherwise sound. Aftermarket flush valves often fit poorly and cause repeat calls, so we source the correct component for your exact model. Call (888) 349-6729 for a written price.
Most single-fixture Toto repairs, like a flush tower or fill valve replacement, are done in a single visit. Washlet and Neorest diagnostics take longer because we test the electronic function before ordering a part. Remodel scopes are scheduled to the project, and we tell you the schedule in writing up front.
We cover the Drake two-piece (CST743 / CST744), the Ultramax II one-piece (MS604114CEFG), the Washlet C5 and S550e bidet seats, the Neorest integrated smart toilets, and older Toto models like the Carlyle still in service in Torrance homes.
Our warranty-safe practice is built to respect your existing Toto coverage rather than void it with mismatched parts. We use OEM components and document the work, which protects the record. If a repair interacts with manufacturer coverage, we’ll tell you before work starts.
A Washlet seat often can be repaired when the trouble is a scaled or clogged nozzle or a sensor fault; a dead control board or a discontinued unit usually points to replacement. We test the seat before recommending either. Call (888) 349-6729 for an exact quote – estimates are free.
A weak Drake flush after ruling out clogs is almost always a worn G-Max flush tower seal or a tired fill valve, not a drain problem. We pull the tank, check the tower seal and refill tube, and swap the assembly with an OEM kit. Call (888) 349-6729 to schedule a diagnostic.
Neorest needs OEM replacement parts. Generic smart-toilet boards and pumps don’t drop into a Neorest cleanly, and a mismatched board can cause repeat faults. We diagnose the electronic function first, then order the correct OEM part. Call (888) 349-6729 for a written price.
Yes. If the porcelain is sound, repairing the internals with OEM parts is the better spend than replacing a fine bowl. We reserve replacement for cracked porcelain or discontinued electronic controls with no reliable OEM path. Call (888) 349-6729 for an honest repair-or-replace call in writing.
Often yes. A Washlet can go on many existing toilets if the seat fit and water supply are compatible, and if we’re already remodeling the bathroom we’ll coordinate the supply and outlet in the same scope. We confirm compatibility before the written quote.
Toto-related bathroom work in Torrance runs from $5000 – $12000 for a small bathroom remodel up to $9000 – $28000 for a full remodel, with a walk-in shower at $4500 – $12000 and a vanity install at $800 – $3000. A single fixture repair is quoted line by line. Call (888) 349-6729 for an exact quote – estimates are free.
Book Your Toto Service in Torrance, CA

Whether your Toto Drake needs a flush tower and fill valve or you’re folding a new Neorest into a bathroom remodel, Rowan Construction Group Torrance gives you a written price before work starts and a documented photo record when we leave. Call (888) 349-6729 for a free estimate, and if you’re weighing repair against replacement, ask about the free second opinion on any written estimate.
Written by the team at Rowan Construction Group Torrance.












