







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Torrance Homeowners Choose KraftMaid Construction
Rowan Construction Group Torrance provides independent KraftMaid construction service in Torrance: cabinet installation and refacing, kitchen remodeling, and bathroom vanity work on KraftMaid Vantage, Momentum, Passage, and Summerhill lines. What makes our KraftMaid work different is documentation – a written flat price and written scope before any tool comes out, no change proceeding without a signed change order, and a photo record delivered after every visit. We are not authorized, endorsed, or affiliated with KraftMaid; we’re an independent provider. Our technicians have up to 19 years of experience, and we cover Torrance from Old Town to the inland edges near the 110. Call (888) 349-6729 to schedule a free estimate.
Why Trust Rowan Construction Group Torrance for Your KraftMaid Construction?

KraftMaid cabinets have quirks you only learn by handling them. Vantage and Momentum drawer boxes use a specific glide footprint, so a replacement that doesn’t match the bracket spacing will bind halfway out. Passage and Summerhill painted and glazed doors chip at the stile-and-rail joints when humidity swings hit them, and a repair that skips prep will fail again inside a year. Our technicians know which KraftMaid hinges have been redesigned, which glide revisions are interchangeable across product cycles, and which finishes touch up cleanly versus which need a full door replacement.
That familiarity matters for your warranty. KraftMaid’s coverage is conditional on proper installation and care, and a repair that uses the wrong fastener, drills new holes in a cabinet box, or modifies a frame in ways the manufacturer didn’t intend can put your coverage at risk. We service KraftMaid products in a warranty-safe way – matching original specs where they matter, sourcing OEM components when color, profile, or fit is critical, and telling you plainly when an aftermarket part is the better call. It’s not guesswork. It’s a documented process.
We work in Torrance, where the housing stock shapes the job. The core of the city is 1950s-to-1970s single-story ranch and California bungalow tract homes on the planned grid, and much of our KraftMaid work is reworking kitchens and baths inside those houses rather than starting from new construction. Original galvanized plumbing and fuse boxes turn up more often than you’d expect in a Torrance kitchen, and that changes what we find when we pull a cabinet run.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Torrance
- Soft-close glides lose dampening in Vantage and Momentum kitchens. After years of daily use, the dampener that makes the drawer glide shut stops working and the drawer slams – or stops closing flush altogether. It’s the most common KraftMaid complaint we hear in Torrance, and it’s a glide replacement, not a cabinet replacement.
- Painted or glazed finishes chip at stile-and-rail joints on Passage and Summerhill doors. Seasonal humidity swings and frequent cleaning around the sink and range take a toll on the finish at the joints where two door components meet. Coastal damp accelerates it, and the fix depends on whether the chip is surface-level or into the wood.
- Sink cabinet cores swell and crumble. Lower-cost particleboard cores absorb water when a supply line, disposal, or drain leak goes unnoticed, and the box swells around the sink or dishwasher opening. You can spot it by feel – a soft corner or a drawer that won’t run true.
- Wall-cabinet shelves sag under heavy loads. Plastic shelf clips wear out and pin holes strip, so shelves on loaded wall cabinets drop or tilt. It’s a small part with a real consequence for a Torrance kitchen used hard every day.
- Door hinges work loose from daily-opening stress. On cabinets that see heavy traffic – the ones next to the fridge or the pantry run – hinges loosen and doors sit off-square. Realignment and hinge replacement solve it when the box is sound.
What connects these problems is that most of them live in the hardware and fronts, not the cabinet boxes. When the boxes are structurally sound, a Torrance homeowner is usually looking at a repair or a reface, not a gut job – a distinction this page exists to make clear.
KraftMaid Parts & Our Repair-vs-Replace Approach

KraftMaid parts fall into two groups, and we treat them differently. Genuine KraftMaid replacement doors, drawer fronts, and hardware make sense when color and profile matching are critical – a single damaged door on an installed Passage kitchen, say, where a near-match would look wrong next to its neighbors. For internal components – glides, hinges, shelf clips – we often recommend high-quality aftermarket equivalents that meet or exceed OEM durability at a lower cost.
Where the parts come from depends on the job. We don’t claim to keep KraftMaid stock on hand; we source the correct replacement for your specific cabinet line and finish, and the quote reflects what that part actually costs.
The repair-or-replace call is honest and straightforward. If the cabinet boxes are structurally sound but the hardware and fronts are tired, refacing or targeted part replacement is a smart, cost-effective alternative to full replacement. If water damage or swelling has compromised the core – the sink cabinet run is the usual suspect – replacement of that run is the wiser investment. We tell you which one you’re looking at and why. Call (888) 349-6729 for a free estimate, and we’ll walk the cabinets with you.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We inspect the cabinet boxes for swelling, check the glide and hinge hardware for wear, and assess the finish at the high-wear joints. We photograph what we find – the condition of the substrate, the state of each glide box, any soft corners – so you see the evidence, not just our opinion.
- 2
Repair or install plan and written price. You get a flat written price and a written scope before any work starts: which parts we’re replacing, whether we’re sourcing OEM or an aftermarket equivalent, and what the finish work covers. Under Clause 1 of the Haven Standard, the price is written before anyone starts.
- 3
The work. Glide and hinge swaps, panel replacement, refacing, or full cabinet installation – done to KraftMaid’s installation specifications so your coverage stays intact. Nothing changes mid-job without a signed change order.
- 4
Test and document. We cycle every drawer and door, check flush fit and alignment, and confirm the soft-close operates as designed. You receive the photo record of what was found and what was done, plus a written warranty, and the 365-Day Done Right Promise backs every job.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Torrance
We service and install across the KraftMaid lines you’re most likely to have in a Torrance home or be considering for a remodel: KraftMaid Vantage and KraftMaid Momentum for the glide and hardware work those lines commonly need, and KraftMaid Passage and KraftMaid Summerhill for painted and glazed door work where the finish takes the wear. Our cabinet installation and refacing service covers new KraftMaid cabinet runs, new doors and drawer fronts on existing boxes, and drawer glide and hinge replacement. Bathroom vanities fall under the same umbrella. We don’t claim to stock these lines – we source the correct part for your specific cabinet and finish and put the number in writing.
We Also Service These Brands
KraftMaid is one line among many we work with. Rowan Construction Group Torrance services Kohler and Toto fixtures, GAF and Owens Corning roofing, PGT windows and doors, and Master Halco fencing alongside KraftMaid. That breadth means when your kitchen job needs a countertop or a Kohler faucet to finish, you’re not handed off – the scope and the written price cover all of it from one contractor. Fifty-plus vetted brands, one documented record.
FAQs – KraftMaid Construction Service in Torrance

Is Rowan Construction Group Torrance authorized by KraftMaid?
No. Rowan Construction Group Torrance is an independent KraftMaid service provider and is not authorized, endorsed, or affiliated with KraftMaid. Our KraftMaid expertise comes from field experience – installing, repairing, and remodeling these kitchens and baths – not from a manufacturer badge. We’re careful to work in a warranty-safe way regardless.
Do you use genuine KraftMaid/OEM parts?
Yes, for the parts where it matters. We source genuine KraftMaid replacement doors, drawer fronts, and hardware when color and profile matching are critical, and for internal components like glides, hinges, and shelf clips we often recommend high-quality aftermarket equivalents that meet or exceed OEM durability at a lower cost. The written quote tells you which you’re getting and why.
How long does KraftMaid service take?
Most hardware and partial repairs – glide replacement, hinge work, a few damaged doors – are a short stop, often completed in a single visit. Refacing a full kitchen or installing new KraftMaid cabinets takes longer and depends on the scope, which we spell out in writing before work starts. Call (888) 349-6729 and we’ll give you a realistic timeline for your job.
What KraftMaid models/series do you cover?
We cover the KraftMaid lines common in Torrance homes: Vantage, Momentum, Passage, and Summerhill, including hardware, fronts, refacing, and full cabinet installation. If you’re not sure which line your cabinets are, we can tell you by looking at the box construction and hardware – it’s part of the diagnosis.
Will service void my KraftMaid warranty?
Not when it’s done properly, and working warranty-safe is a core part of how we service KraftMaid. We match original specs where they matter, avoid modifications the manufacturer doesn’t intend, and tell you plainly when a repair should go through KraftMaid’s own coverage instead. That’s why we diagnose the specific line and part before we touch anything.
How much does KraftMaid construction cost in Torrance?
Here are representative ranges from our Torrance market, and every job gets a flat written price before work starts:
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
The final number depends on the line, the finish, whether you’re refacing or replacing, and whether water damage has compromised a cabinet core. Call (888) 349-6729 for an exact quote – estimates are free, and the price we give you is written.
Book Your KraftMaid Service in Torrance, CA
Whether your Vantage drawers stopped closing flush, your Passage doors are chipping at the joints, or you’re ready to install new KraftMaid cabinets in a Torrance kitchen, Rowan Construction Group Torrance gives you a written flat price and a written scope before any work starts. Call (888) 349-6729 to schedule your free estimate, or bring a competitor’s quote for a free second opinion, line by line.
Written by the team at Rowan Construction Group Torrance.












