







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Torrance?
Walk-in shower installation in Torrance typically costs $4,500 to $12,000, with the median project landing near $7,800. A clean curbless install with a prefabricated pan and porcelain tile sits at the low-to-middle end of that range; a fully custom job with a linear drain, bench, and frameless glass lands near the top. Tile selection and drain style move the number more than square footage does on most jobs we quote.
That range covers demolition of the old surround, a Schluter Kerdi or Wedi waterproofing membrane, new valve trim, tile, and glass. A live person answers our phones 24/7 if you want to talk through your specific tub or shower footprint before you commit to a number.
Key Takeaways
- A basic walk-in shower in Torrance runs $4,500-$7,500; a curbless custom build runs $8,000-$12,000.
- Tile, glass, and drain placement drive most of the price swing – not the shower’s width.
- Old Torrance and South Torrance homes from the 1940s-60s often need a drain re-route that adds $600-$1,400.
- A written flat price is delivered before work starts, and no change proceeds without a signed change order.
- Every visit includes a documented photo record of what we found and what we did, as standard.

Walk-In Shower Installation Cost Breakdown (2026)
Here’s how a Torrance walk-in shower breaks down line by line. These ranges reflect what our crews and vetted trade partners actually see on jobs in this market – not a national average.
| Line Item | Typical Range |
|---|---|
| Demolition and disposal of old tub/shower surround | $400 – $900 |
| Plumbing rough-in: new valve, drain relocation, curbless conversion | $800 – $2,400 |
| Waterproofing membrane (Schluter Kerdi or Wedi board) | $600 – $1,600 |
| Shower pan: prefab acrylic vs. custom mortar bed with tile | $350 – $1,800 |
| Wall tile and installation (porcelain, ceramic, natural stone) | $1,200 – $3,800 |
| Glass enclosure: framed, semi-frameless, or frameless | $700 – $2,800 |
| Fixtures: Kohler, Toto, Moen, or Grohe valve, trim, and showerhead | $300 – $1,100 |
| Linear drain vs. center drain | $250 – $700 |
| Bench, niche, or grab bar addition | $250 – $1,200 |
| Permit and inspection (City of Torrance) | $250 – $600 |
Add those up and you land inside the $4,500-$12,000 band. A tub-to-shower conversion that keeps the existing drain location tends to sit at the low end. A curbless build with a mortar bed and a linear drain pulls the whole job up $2,000-$3,500 because the floor has to be recessed or built up with a framing block and the tile has to slope to a single low point.
Waterproofing is the line item that’s easy to cut and the one you should never cut. A shower that isn’t backed by a proper membrane – bonded sheet like Kerdi or a cement board system like Wedi – will grow mold behind the tile within a few years in Torrance’s marine climate. We’ve opened walls in the Hollywood Riviera where a previous install used drywall behind travertine, and the studs were soft to the touch. That’s a $1,100 line item now or a $4,000 tear-out later.
What Affects Walk-In Shower Installation Pricing in Torrance
- Home age and drain location. A lot of South Torrance and Old Torrance housing stock was built between 1945 and 1965 on galvanized supply lines and cast-iron drains. When we open a wall and find a 2-inch drain that’s corroded or a valve that’s seized, re-routing to a 2-inch ABS line adds $600-$1,400 to the job. This isn’t an upsell – it’s what the photo record on the first visit will show you under the old surround.
- Curbless vs. curb. A curbless (zero-threshold) entry requires the floor to be recessed into the framing or built up on a mortar bed, plus a linear drain. That structural work adds $1,000-$2,500. It’s worth it for aging-in-place households and it’s what most of the Torrance homeowners we work with ask for in advance.
- Tile choice. Large-format porcelain (24×48) runs $5-$9 per square foot installed. Natural stone – marble, travertine, slate – runs $12-$28 installed because it needs a redgard or membrane system under it and a penetrating sealer to survive humidity. Porcelain that imitates marble is the value pick in this market right now.
- Glass. A framed sliding door with tempered glass runs $700-$1,200. A frameless 3/8-inch door with a fixed panel runs $1,800-$2,800. Tempered glass is code-mandated in a shower enclosure; we don’t install anything else.
- Slab access and building permits. For second-floor bathrooms in the Hillside and Walteria areas, the drain and valve access happens through the ceiling below and often needs a small drywall patch and repaint in the room below – a $300-$700 item that surprises people. Torrance requires a plumbing permit for any valve or drain change, and the inspection cycle adds a half day to the schedule.
- Water damage found under the old surround. Roughly one in five Torrance showers we open has some rot at the curb or in the bottom two rows of studs, usually a slow leak from an old acrylic pan. Repair adds $400-$1,500. We photograph what we find before we quote the fix and never proceed until the change order is signed.

How to Save on Walk-In Shower Installation in Torrance
There are honest ways to bring a walk-in shower into the low end of the $4,500-$12,000 range, and there are ways that cost you more later. Here’s the short list.
- Keep the drain where it is. A tub-to-shower conversion that reuses the existing drain line saves $600-$1,400 over a relocation. If your current tub has a 2-inch ABS drain that’s still in good shape, that’s a real saving.
- Choose porcelain over natural stone. Porcelain at $5-$9 installed versus marble at $12-$28 installed. For a typical 3×5 shower, that’s $1,400-$2,600 back in your pocket, and it needs no sealing.
- Prefab pan, tile walls. An acrylic or cultured-marble shower pan with tiled walls is a hybrid that costs $400-$800 less than a full mortar-bed build while still passing the waterproofing test.
- Framed glass over frameless. A framed enclosure saves $1,000-$1,600. If the shower is a kid or guest bath, take the saving.
- Bring a competitor’s written estimate for a free second opinion. We’ll review it line by line at no charge. If a quote lists $2,800 for tile on a standard 30-square-foot shower and doesn’t itemize the membrane, we’ll show you why.
- Bundle the project with a bathroom remodel. If you’re already doing a Torrance service area bathroom remodel – vanity, tile floor, lighting – folding the shower into the same job spreads permits, demolition, and disposal across one build instead of two.
Every Rowan quote is a flat written price with a written scope and a written warranty before work starts. There’s no “call for a quote” step here. If a number we give you doesn’t match what shows up on the invoice, the 365-Day Done Right Promise applies: we make it right. Call (888) 349-6729 and we’ll give you a range over the phone and a written number on the first visit.
How Long Does a Walk-In Shower Installation Take in Torrance?
A standard walk-in shower takes 5 to 9 working days from demolition to final glass install. A curbless build with a mortar bed and linear drain runs 8 to 12 days because the tile floor has to cure fully before the drain’s flood test and the glass can be templated. The Torrance permit and inspection cycle adds roughly 1 to 3 days depending on the city queue at the time.
The schedule isn’t vague here. We give you a start date, a demolition date, a tile date, and a glass-templating date on the written scope. The one thing that shifts a schedule is what we find under the old surround – and when that happens, the change order is signed before we lift a tool.
Can You Install a Walk-In Shower Over an Existing Tub?
No, not over it – the tub has to come out. A tub-to-shower conversion in Torrance runs $3,500 to $10,000 because the demolition, drain line, and floor are already in place, which makes it the value play if you already have a tub you want gone. A full walk-in shower install where there’s currently open floor runs $4,500 to $12,000 because the rough-in, pan, and waterproofing all start from scratch.
The conversion also answers a question most homeowners don’t think to ask: the existing 30×60 tub footprint is exactly the right size for a standard shower pan, so you’re not re-framing. That’s a $700-$1,200 saving versus cutting a new shower out of a larger bathroom. Call (888) 349-6729 with the measurements and we’ll tell you which way the numbers land.
Is It Cheaper to Repair the Old Shower or Install a New One?
Repair is almost always cheaper in the short run – a caulk-and-grout refresh is a few hundred dollars, and a new valve trim runs $200-$500. But if your tile is cracking, the grout has failed, and the walls are soft, repair is the expensive option over a five-year window because the water is already behind the wall. A full shower replacement runs $3,000-$8,500; a walk-in shower install runs $4,500-$12,000. The break-even is roughly when you’re on your second major repair inside 10 years – at that point, the new build is the cheaper path.
What Kind of Shower Pan and Drain Do You Recommend for Torrance Homes?
For most Torrance installs we recommend a mud-set (mortar bed) pan with a Schlueter Kerdi-Line linear drain for curbless showers, or a prefab acrylic pan with a standard center drain for budget conversions. The mortar bed with a bonded waterproofing membrane is the standard that survives our marine climate – inland Torrance and the coastal edge of the South Bay both see enough humidity that a cement board and liquid membrane wall assembly, correctly detailed, is the reliable choice. Kohler and Moen valves are our default trim brands; both have parts available locally and both have decades of support.
FAQs – Walk-In Shower Installation Cost in Torrance
How much does walk-in shower installation cost in Torrance?
Walk-in shower installation in Torrance costs $4,500 to $12,000 in 2026, with most projects landing around $7,800. The low end is a tub-to-shower conversion with porcelain tile and framed glass; the high end is a curbless mortar-bed build with a linear drain and frameless glass. Call (888) 349-6729 for a free written estimate – and a phone range while you’re on the line.
Is a walk-in shower cheaper than a tub-to-shower conversion?
No – a walk-in shower install runs more because the drain, pan, and waterproofing all start from scratch, and a tub-to-shower conversion reuses that existing footprint. That’s why the conversion sits at $3,500-$10,000 versus $4,500-$12,000 for a full walk-in. If your existing tub is 60 inches long and 30 inches wide, the conversion is the value play. Call (888) 349-6729 and we’ll price both from the same measurements.
Do I need a permit for a walk-in shower in Torrance?
Yes. Any walk-in shower that changes or relocates the drain, replaces the valve, or moves fixtures requires a plumbing permit through the City of Torrance, and the inspection cycle runs 1 to 3 days. That permit line item is $250-$600 depending on scope, and we write it into the estimate rather than discovering it mid-build. Call (888) 349-6729 if you want to talk through what your specific job will need.
How long does walk-in shower installation take in Torrance?
Five to nine working days for a standard install, eight to twelve for a curbless mortar-bed build with a linear drain. The difference is the flood test and floor cure time before the glass can be templated. We give you a demolition date, tile date, and glass date in the written scope before the crew shows up. Call (888) 349-6729 to start scheduling.
Can you install a walk-in shower in a small Torrance bathroom?
Yes. Standard walk-in showers are 30 to 36 inches wide and 48 to 60 inches deep, which fits most Torrance bathrooms built after 1970. In pre-war homes in Old Torrance and the older pockets of Walteria, a 30×48 pan may be the maximum that fits without moving a wall – and a linear drain lets you squeeze a few more inches out of a narrow footprint. Call (888) 349-6729 with the room’s dimensions and we’ll verify before you order anything.
What’s included in a Rowan walk-in shower quote?
The quote is a flat written price with a written scope and written warranty that itemizes demolition, plumbing rough-in, waterproofing, pan, tile, glass, fixtures, permit, and disposal. A documented photo record of the first visit is standard on every job – you see what we found before we quote the fix. Under the 365-Day Done Right Promise, if it isn’t right, we make it right. Call (888) 349-6729 or bring a competitor’s written estimate for a free second opinion, reviewed line by line at no charge.
Why Rowan for Walk-In Shower Installation in Torrance
We put the price range on the page because a homeowner researching a shower install at 9pm should be able to screenshot a number and compare it to the next contractor’s. Our technicians have up to 19 years of experience, and every crew arrives background-checked and uniformed with a documented photo record of the visit. The written quote comes before any work starts, and no change moves forward without a signed change order – the reason projects finish within a few percent of the number the customer agreed to. Kohler and Toto fixtures, Schluter waterproofing systems, and porcelain from a vetted tile line are standard equipment, not upgrades.
For the wider picture on how a walk-in shower fits with a broader renovation, start at our home page – the seven trades we cover run from kitchen and bath through roofing, windows, pavers, fencing, and home additions. Walk-in shower work sits inside our bathroom remodeling practice, and every job – whether it’s a 30×60 conversion in North Torrance or a curbless 5×7 in the Hollywood Riviera – gets the same flat written price, photo record, and 365-Day Done Right Promise.
If your current tub is failing or the tile is cracked, don’t wait on a repair that just delays the inevitable. Call (888) 349-6729 for a free estimate. A live person answers 24/7, we’ll give you a range while you’re on the line, and the written number lands on your first visit – no deposit required, no obligation, no “call for a quote.”
Pricing reflects the Torrance market as of 2026. Rowan Construction Group Torrance offers free estimates – call (888) 349-6729.
What Our Customers Say
"Solid work, decent crew, and the site was left tidy every evening."
- Pearl A."Good communication throughout. Weekly written update meant I never had to chase them."
- Nadine G."Final invoice was within two percent of the contract. Every change was priced and signed before anyone picked up a tool."
- Malcolm T.












