







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCabinet Installation & Refacing in Torrance, CA
Cabinet installation in Torrance runs $4,200 to $9,500 for a standard 10-foot run of base and wall cabinets in semi-custom stock. Refacing the same kitchen, where the boxes are sound and only the doors, drawer fronts and veneer change, typically lands between $2,400 and $5,800. The split matters because Torrance has a lot of 1950s and 1960s tract housing where the cabinet boxes are solid maple or plywood and the doors are the only failing part.
Rowan Construction Group Torrance handles both paths under one written scope. We measure the room, name the price in dollars before anyone touches a screwdriver, and hand you a photo record of what the old cabinets looked like coming out. Every job is quoted flat, in writing, with a written warranty attached. You can call (888) 349-6729 and reach a live person any hour to start the conversation.
This work sits inside our broader Kitchen Remodeling service, so if the cabinet swap is part of a larger tear-out, the scope stays on one page and one price. For the full picture of how cabinets fit into a kitchen build in this city, see our Kitchen Remodeling in Torrance page.
Key Takeaways
- Refacing costs roughly half of full replacement when the cabinet boxes are structurally sound.
- Torrance’s coastal humidity swings affect door materials more than box construction – MDF doors swell at the edges near the beach, solid wood and plywood hold better.
- We name a flat written price before work starts, backed by the 365-Day Done Right Promise.
- Crews are background-checked and uniformed, and every visit includes a documented photo record.

When You Need Cabinet Installation & Refacing
Cabinet problems in Torrance tend to show up in predictable ways, and the fix depends on whether the box or the face is failing. Here’s what pushes most homeowners to call.
- Doors that no longer close flush. In the older homes around Old Torrance and the Hollywood Riviera, original 1950s cabinet hinges were often surface-mounted and wear out after decades of use. If the box is straight but the doors sag or rub, refacing solves it for a fraction of replacement cost.
- Water damage at the sink base. Torrance kitchens see steady humidity, and the cabinet under the sink is where particleboard fails first. If the damage is contained to one box, we replace that unit and match the rest rather than tearing out the whole run.
- A layout that fights the room. Homes in the Southwood and Hickory Park areas often have galley kitchens with a single wall of cabinets and dead corner space. New installation lets us reclaim that corner with a lazy Susan or pull-out and add a cabinet where the old plan had none.
- Outdated doors you want gone without a full demo. If you like the footprint but the oak raised-panel doors date the room, refacing with KraftMaid or Wellborn door styles updates the look without ripping out functional boxes.
- Adding storage before a sale. Buyers in this market read the storage. A pantry cabinet or a bank of drawers where there was open shelving is one of the few kitchen upgrades that reliably reads on a listing.
- Post-flood or post-leak rebuilds. If a supply line failed and warped the lower boxes, the insurance scope usually covers replacement – we quote to that scope in writing so the adjuster and the homeowner work from the same numbers.
Our Cabinet Installation & Refacing Process
Every cabinet job follows the same sequence. The point of the sequence is that you know the price and the plan before a single box comes off the wall.
- Measure and assess the boxes. We check plumb, level and square on the existing cabinet run. A box that’s out of square by more than a quarter inch usually rules out refacing, because new doors won’t hang true on a twisted frame. We tell you which path the room supports.
- Write the price and the scope. Under the Haven Standard, the flat price arrives in writing with a written scope and a written warranty before any work begins. No “call for a quote” step, no ballpark that drifts. You get a number you can screenshot and compare against another contractor’s.
- Order materials with brand and spec named. We source through a vetted brand list – KraftMaid and Wellborn for cabinet boxes and doors, among others. The quote names the door style, the box material, the finish and the hardware, so there’s no substitution surprise on delivery day.
- Protect the room and demo. Floors and counters get covered. Old cabinets come out, and we photograph the wall behind them – what the substrate looked like, whether there was old water staining, how the electrical was run. That photo record goes into your file.
- Install, level and hang. New boxes get shimmed and screwed to studs, checked for level across the full run, then doors and drawers go on and get adjusted. Refacing follows the same discipline: veneer applied flat, edges trimmed clean, new doors hung and aligned.
- Walk-through and sign-off. We open every drawer, close every door, and hand you the documented photo record and the written warranty. If something’s off, the 365-Day Done Right Promise covers it – if it’s not done right, we make it right.
If the cabinet work is part of a larger rebuild, our bathroom remodeling and home additions crews coordinate on the same schedule so trades don’t collide.

Cabinet Installation & Refacing Pricing in Torrance
Cabinet pricing in Torrance depends on linear feet, door material and whether the boxes stay. Here are the ranges we write into quotes for this market.
| Scope | Typical range |
|---|---|
| Refacing, standard 10-ft run (doors, drawer fronts, veneer, hardware) | $2,400 – $5,800 |
| Refacing with new countertop overlay allowance | $4,000 – $7,200 |
| Full installation, semi-custom stock (KraftMaid, Wellborn class) | $4,200 – $9,500 |
| Full installation, custom or inset doors | $9,000 – $18,000+ |
| Single box replacement (sink base, damaged unit) | $450 – $1,100 |
| Added pantry or drawer bank, installed | $900 – $2,600 |
What moves the number: door material (solid wood and plywood cost more than MDF, and hold up better to coastal humidity), box construction (plywood versus particleboard), hardware grade (soft-close versus standard), and whether the electrical or plumbing has to be moved to fit a new layout. A galley kitchen in Southwood with a straight run prices lower than an L-shaped kitchen in the Hollywood Riviera where the corner has to be reworked.
We also offer a free second opinion on any written estimate. Bring a competitor’s quote and we’ll review it line by line at no charge, which is often the fastest way to catch a scope gap before you sign.
Cabinet installation often pairs with countertop and backsplash work. For the surrounding trades, see our guides on roofing, windows and doors, and fence installation if your project is bigger than the kitchen. Homeowners in neighboring areas can also read our pages for Redondo Beach, Manhattan Beach, Palos Verdes, and Lomita for how the numbers shift by city.
FAQs – Cabinet Installation & Refacing
Is it cheaper to reface or replace kitchen cabinets in Torrance?
Refacing is cheaper in most Torrance kitchens where the boxes are sound – roughly half the cost of full replacement, often $2,400 to $5,800 versus $4,200 to $9,500. The deciding factor is the box: if the frame is plumb, level and free of water damage, refacing keeps it. If the box is swollen or out of square, replacement is the honest answer. Call (888) 349-6729 for a written quote on either path – estimates are free.
How long does cabinet installation take?
A standard 10-foot cabinet run installs in two to four days once materials arrive, and refacing usually runs two to three days. Custom or inset doors add lead time on the order, not on the install itself. We name the install window in the written scope so you can plan around it.
What brands do you use for cabinets and doors?
We source through a vetted brand list that includes KraftMaid and Wellborn for cabinet boxes and door styles, and we name the exact brand and spec in the written quote so there’s no substitution on delivery. For windows and doors in the same remodel, our crews work with ES Windows and ECO Window Systems among others.
Do you offer a warranty on cabinet work?
Yes. Every cabinet job carries the 365-Day Done Right Promise: if it’s not done right, we make it right, backed by The Haven Standard rather than a handshake. The written warranty comes with the written price before work starts.
Ready to price your kitchen? Call (888) 349-6729 for a free estimate on cabinet installation or refacing in Torrance, or reach out through our home page. A live person answers any hour, and your written price arrives before anyone picks up a tool.
Written by the team at Rowan Construction Group Torrance, serving Torrance.


