







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Torrance Homeowners
Salt air and strong afternoon sun are hard on windows and doors in Torrance, and the damage shows up first at the seals, the glazing, and the tracks. Our technicians have up to 19 years of experience sorting out exactly what’s failing and quoting the fix in writing before anyone touches a sill. We replace single-pane inserts that fog and weep with ES Windows impact units rated for this coastal zone, and we reset doors that no longer latch because the frame has shifted after a slab foundation has moved. Call (888) 349-6729 and a live person answers, day or night. Every visit includes a documented photo record, and every quote is a flat written price backed by our 365-Day Done Right Promise.
What Our Windows & Doors Service Includes

Window Installation
Window installation is the process of setting a new frame and glazing unit into a rough opening, flashed and sealed so water sheds away from the wall rather than into it. You need it for new construction, an addition, or any wall where the existing opening is already open and the old window is gone. We pull the measurements, match the frame profile to the stucco return, and cap the exterior so the finished window sits flush with the surrounding plaster.
Door Installation
Door installation covers new entry doors, interior doors, and the framing, jamb, and hardware they sit in. You need it when a door has been replaced badly and the deadbolt never lined up again, or when you’re adding a door where a solid wall used to be. We check the plumb of the wall first, set the jamb so the door swings free of the strike plate, and re-key the lock before we leave.
Window Replacement
Window replacement swaps the existing unit out for a new one, usually using a retrofit insert so the surrounding stucco and interior drywall stay intact. You need it when glass has fogged between the panes, the frame has cracked at a corner, or a 1970s aluminum slider won’t seal against the wind. We measure existing openings, verify the sill is sound, and match the replacement so it sits in the same reveal without a visible gap.
Impact Windows & Doors
Impact windows and doors use laminated glass and a reinforced frame rated to resist flying debris and windborne pressure. You need them where local code requires impact-rated assemblies, or when you simply want the strongest glazing available for a home near the coast. We supply and install units we can produce a product approval sheet for, and we hand that sheet over with the quote.
Energy-Efficient Windows
Energy-efficient windows pair low-emissivity glass coatings with insulated frame materials and an argon or krypton fill between panes. You need them when a room runs hot in the afternoon or cold at night no matter what the thermostat says. We look at the orientation of the wall, the shade from eaves and trees, and the existing glazing before recommending a U-factor, because a window that saves energy on one wall can be the wrong glass on another.
Sliding & Patio Doors
Sliding and patio doors are the wide glazed openings that lead to a yard, deck, or patio, and they take the hardest wear of any door in a house. You need them replaced when the rollers grind, the glass has lost its seal, or the panel no longer meets the jamb and lets air in. We check the track height and the sill pan before ordering, since a new panel in an old worn track will drag within a season.
Impact Garage Doors
Impact garage doors are reinforced, wind-rated overhead doors built to hold up when a storm pushes against the widest single opening on most homes. You need one when the existing door is a stock non-rated model, or when a garage conversion or addition has changed the load on that wall. We match the door to the ceiling track and the opener you already have, and we don’t count a garage door as done until it cycles clean from open to close a few times.
Custom & Geometric Windows
Custom and geometric windows are made to a specified shape – arch-top, half-round, trapezoid, or the angled gables common on two-story additions around Torrance. You need one when a stock size won’t fill the opening or when a design calls for glass that follows a roof pitch. We template the rough opening rather than guessing at it, and we confirm the radius and the springline with the fabricator before the order goes in.
Hurricane Impact Windows
Hurricane impact windows are the same impact-rated assemblies spec’d for high-wind zones, tested against debris impact and cyclic pressure. You need them where an insurer or a lender asks for rating documentation, or where the home sits in a wind-exposure category that calls for more than standard glass. We provide the approval documentation with the written price so the lender or inspector can read what’s going in before the unit ships.
Impact Sliding Glass Doors
Impact sliding glass doors bring impact-rated laminated glass into the wide patio opening, where ordinary glass is most exposed. You need one when you’re upgrading a home’s glazing as a set and don’t want the patio door left as the weak point. We verify the sill pan and drainage path, then set the door so it slides on a new track with a fresh weather seal.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
We service ES Windows products and know their frame profiles and impact ratings well, which matters when a replacement unit has to match an existing opening without a visible filler strip. We also work with CWS impact assemblies and have handled enough of their sliders and casements to know where the seals and hardware wear first. Whether you have ECO Window Systems glass in place or any other make, we can help.
Knowing a brand is less about the name on the frame than about how that product fails in this climate. ES Windows and CWS units in Torrance tend to take the same beating – coastal salt on the hardware, UV on the weather stripping, thermal cycling at the seal line – and we know which parts to inspect first. Whether you have ES Windows, CWS, or any other make, the written quote tells you what we found and what we’ll do about it, line by line.
Signs You Need Windows & Doors Right Now
- Fogging between the panes. A cloudy or milky pane means the seal has failed and the inert gas has escaped. The glass no longer insulates, and the fog will only spread until the unit is replaced.
- A door that won’t latch or rubs the frame. This usually means the frame has shifted or the hinge side has settled. Left alone, the gap lets in water and insects, and the strike plate wears until the deadbolt stops engaging at all.
- Daylight or a draft around a closed window. If you can see light past the sash or feel air on your hand at the frame, the weather stripping or the seal has given out. Air moving past the glass means the room is losing heat you’re paying for.
- Rot, soft wood, or bubbling paint at the sill. Water has been getting behind the frame and into the wall. The sooner it’s opened up, the less framing needs to be replaced.
- Sticking sliding doors and grinding hardware. A patio door that takes two hands or a shoulder to move is a worn roller or a bent track. The mechanism gets harder to find parts for the longer you wait.
Our Windows & Doors Process – Step by Step
1. Walk-through and measurement. We measure every opening, check plumb and level on the wall, and note the depth of the existing sill and reveal. We photograph each opening so there’s a record of the condition before work starts.
2. Written price and scope. Under Clause 1 of The Haven Standard, you get a flat written price and a written scope before any work begins. That includes the unit specifications, the glass rating, and the trim and flashing details, so nothing is left to a verbal understanding.
3. Product order and documentation. We confirm the exact unit – brand, model, glass rating, and finish – and hand over the product approval sheet where one applies. No change to the order proceeds without a signed change order, which is how the project stays within a few percent of the price you agreed to.
4. Removal, install, and seal. The old unit comes out, the opening gets checked for rot and sound framing, and the new frame is set, shimmed, and flashed. We seal the exterior, cap the trim, and verify the door or window operates through its full range before we move to the next opening.
5. Documentation and walk-through. We finish with a documented photo record of each finished opening and a written warranty, and we walk you through the whole job. If anything isn’t done right within the 365-Day Done Right Promise, we make it right.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Torrance?

A typical window replacement project in Torrance runs $4,500 – $15,000 depending on how many openings and what glass you choose. Impact window installation runs $8,000 – $25,000, with the price driven by the rating required and the number of large sliders in the plan. A single patio door swap sits at the lower end of the window replacement range; a full-house package of impact-rated units with custom geometric windows sits near the top of the impact range.
What moves the number: the size and shape of each unit, the glass rating, the frame material, and whether the opening needs reframing. A retrofit insert is less than a full frame replacement because it saves the surrounding stucco and interior drywall. What we don’t do is pad it with a range that changes after the work starts.
A free estimate from Rowan Construction Group Torrance includes the measured openings, the unit specifications, and a flat written price – a number you can screenshot and compare. If you already have a competitor’s written estimate, we’ll review it line by line at no charge through our Free Second Opinion offer. Call (888) 349-6729 for an exact quote.
Windows & Doors Near Torrance – Our Service Area
We serve homeowners across Torrance and the surrounding South Bay – Lomita to the south, West Carson to the east, Lawndale and Gardena to the north. Whether you’re near Old Torrance or out toward the beach, our Torrance service area page spells out what we cover. Nearby areas link in through Lomita service area and West Carson service area, and every job quotes the same flat written price.
Serving Torrance, CA – Our Local Coverage Area
We serve Torrance and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Torrance

Windows & Doors is the trade covering the supply, measurement, installation, and replacement of a home’s glazed openings – the units that let in light and air while keeping weather and noise out. It spans everything from a single fogged bedroom window to impact-rated sliders and custom geometric units in a new addition. Rowan Construction Group Torrance handles the whole scope, from measuring the rough opening to sealing the trim and handing over the documentation.
Most window replacement jobs run one to three days once the units arrive, and the time before that is the order lead time, which can be several weeks depending on the brand and glass. A single door or patio slider is usually a day. We put the expected install window in the written scope so you can plan around it, and any change to that schedule goes through a signed change order.
Window replacement in Torrance runs $4,500 – $15,000, and impact window installation runs $8,000 – $25,000 depending on the rating and the number of openings. The number is set by the glass rating, the frame material, the size and shape of each unit, and whether the wall needs reframing. Call (888) 349-6729 for an exact quote – estimates are free and every price is written.
Yes, we service ES Windows products and know their frame profiles and impact ratings. We also work with CWS and ECO Window Systems units, and we’re comfortable inspecting and replacing any brand of window or door in a Torrance home. Whether you have ES Windows or any other make, we can help.
Yes, a live person answers our line 24/7 and can get a crew out for a door or window that’s been broken or left hanging after a storm. We can board or secure the opening quickly and then quote the full repair in writing. Call (888) 349-6729 and we’ll start with making the home weathertight.
Every job carries the 365-Day Done Right Promise: if it isn’t done right within the year, we make it right. The written warranty comes with your written scope, and the manufacturer’s product warranty on the unit is documented alongside it. We hand over the paperwork rather than keeping it in a file.
Clear a path to each opening and move furniture and breakables away from the walls where the crew will work. If the job involves replacing an interior door, take down window coverings and wall hardware first. We’ll send a short prep note before the install day so you know exactly what to have ready.
Schedule Your Windows & Doors Service in Torrance Today
Whether it’s one fogged window or a whole-house impact upgrade, call (888) 349-6729 for a free estimate. A life person answers around the clock, we put the price in writing before any work begins, and every visit comes with a documented photo record. If something isn’t done right, the 365-Day Done Right Promise covers it. Ready to move on the driveway or an addition after the windows? Start with our home page and take it from there.
Written by the team at Rowan Construction Group.












